PWP-UNROM-128 -- bare board profile
MES Edutainment System / The Perfect World Project

board outline      100.00 x 65.50 mm
board thickness    1.20 mm  (NOT 1.6 mm)
layers             2
card edge tongue   93.50 mm wide x 14.50 mm deep
edge fingers       36 positions per side, 72 total
finger pitch       2.50 mm
finger width       2.0 mm (3.0 mm at both ends)
finger height      12.00 mm, y 1.00..13.00 from board bottom
finish             ENIG overall, hard gold on the fingers
bevel              30-45 deg lead-in on the tongue, both sides
mask clearance     no soldermask below y=21.0 (top) / y=18.0 (bottom)

source of dimensions: NESdev wiki, NES cartridge dimensions
https://www.nesdev.org/wiki/NES_cartridge_dimensions

This package is the board PROFILE only -- no circuit copper, no
component holes.  It is for quotation and DFM review of the card
edge.  Do not build boards from it.
